Business Division

Timber / Logs
Steel Products
Agro Products

Timber / Logs

We export Logs and Timbers mainly from African continent. Few of our regular exported wood is listed below;

1. Padauk
African Paduak is a very strong, stable hardwood. It is known for its typically robust reddish-brown coloration (which darkens with age), although colors can range from bright orange to a slightly muted burgundy often with highlights, grain lines, and/or secondary colors ranging from brick red to a more purplish muted hue. The wood can sometimes be found figured (ribbon; striped; etc.), and it is well known for its deep chatoyance and wonderful natural luster. Grains are typically straight, though sometimes interlocked. The wood is considered very durable and also resistant to bug/insect/termite attack, which accordingly has seen it used in outdoor applications for centuries in its native Africa. It’s working and finishing characteristics are decidedly favorable.
2. Teak
We procure the Teak Wood mainly from Ghana. Ghana Teak Wood is known for its durability and reliability. The main attribute of this kind of teak is that it has good resistance to decay & termites.

We offer our clients a class range of genuine Ghana Teak Wood widely used in marine applications, furniture, and constructions.

Steel Products

Flat steel Products

  • Hot Rolled Coils / Sheets / Plates
  • Cold Rolled Coils / Sheets (Bright and Black Annealed)
  • Coated Steel Coils / Sheets / Corrugated Sheets / Profile Sheet

Long Steel Products

  • Wire Rods
  • Steel Billets
  • Reinforcing Bar or Deformed Bars (Merchant Bars)

Flat steel Products

1. Hot Rolled Coils / Sheets / Plates

Hot-rolled coil is produced from semi-finished products, which are reduced to certain thicknesses by rolling and annealing and wound into a roll. Hot-rolled steel is used in e.g. for the manufacture of pipes, steel doors and tanks or is further processed into cold-rolled steel.


Hot Rolled (Coils, Sheets, Plates, Floor Plates)
Q235, A36, A572, A729, S355JR, S460N, S460M, SAE1006, SAE 1008 B or Cr.
2mm and up to 25mm
5mm up to 300mm
2mm and up to 25mm
900mm up to 1500mm
1500mm up to 3000mm
1000mm up to 1500mm
Coils and Cut Sheets
Cut Sheets and Coils
2. Cold Rolled Coils / Sheets (Bright and Black Annealed)

Cold-rolled steel refers to low-carbon steel produced by a “cold rolling” method and processed at near normal room temperatures. Cold-rolled steel offers superior strength and machinability. Cold-rolled steel sheets are commonly used for engineered products where tight tolerances, concentricity, straightness and coated surfaces are required.


Cold Rolled (Coils & Sheets) (Close Annealed, Full Hard, Black Annealed)
JIS G3141 & also in equivalent American Standards SPCC SD, DD, 1B etc
0.30mm and up to 2mm
0.11mm upto 0.30mm
900mm up to 1500mm
750mm up to 1250mm
Coils and Cut Sheets
3. Coated Steel Coils / Sheets / Corrugated Sheets / Profile Sheet

Coated Steel is basically the product of continuous and highly automated industrial process for efficiently coating coils of metal with alloys like zinc, Aluzinc and polyester based paint. We deal in the following coated steel products;



Coated Steel
– Galvanized
– Galvalume
– Pre-Painted
– GI

CQ, A653, A792, GR50, GR40, G300, G550, (Z40~275
Paint: 12mic to 25mic)
0.125mm and up to 2mm
750mm up to 1250mm
Coils / Sheets/
Corrugated Sheets/
Profiled Sheets
i. Hot-Dipped Galvanized Coils:

It is produced by a process called galvanization where the iron and steel is coated with zinc, which alloys with the surface of the base metal when immersing the metal in a bath of molten zinc at a temperature of around 840 °F (449 °C).

ii. Hot-Dipped Galvalume Coils:

Galvalume is a product of continuous and highly automated process for efficiently coating the coil surface with an alloy which is a combination of Aluminium (55%) and Zinc (43.5%) and a little amount of Silicon and other elements.

iii. Pre-painted galvanized or galvalume coils:

Pre-painted galvanized or galvalume coils, also known as pre-coated steel coil, coated steel, color coated steel etc., typically with a hot dip zinc and or hot dip aluzinc coated steel substrate. The term is an extension of GI or GL which is a traditional abbreviation for Galvanized Iron and Galvalume respectively.

Long steel Products

1. Wire Rods

Wire Rods are semi-finished product made out of billets by drawing process under hot rolling temperature. They are majorly used in fastner industries, roofing nail manufacturing and wire drawing.

2. Steel Billets

Steel Billets are also known as square bars are a semi-finished raw material that is used in manufacturing rebar, wire rod, and also seamless pipes. (from round billets)


Rebar (short for reinforcing bar), known when massed as reinforcing steel or reinforcement steel, is a steel bar or mesh of steel wires used as a tension device in reinforced concrete and reinforced masonry structures to strengthen and aid the concrete under tension. Concrete is strong under compression but has weak tensile strength. Rebar significantly increases the tensile strength of the structure. Rebar’s surface is often “deformed” with ribs, lugs, or indentations to promote a better bond with the concrete and reduce the risk of slippage. The most common type of rebar is carbon steel, typically consisting of hot-rolled round bars with deformation patterns. Other readily available types include stainless steel and composite bars made of glass fiber, carbon fiber, or basalt fiber. The steel reinforcing bars may also be coated in an epoxy resin designed to resist the effects of corrosion mostly in saltwater environments, but also land-based constructions. Bamboo has been shown to be a viable alternative to reinforcing steel in concrete construction. These alternate types tend to be more expensive or may have lesser mechanical properties and are thus more often used in specialty construction where their physical characteristics fulfill a specific performance requirement that carbon steel does not provide. Steel and concrete have similar coefficients of thermal expansion, so a concrete structural member reinforced with steel will experience minimal differential stress as the temperature changes


Our long -standing experience in the fertilizer trading sector has made us one of the most trustworthy and reliable partners in the business. Delivering targeted and customised solutions to our partners and customers has always been our prime focus, providing us the edge both in logistics and sourcing.

Through strategic stakes and long-term sourcing agreements with key manufacturers for incessant off-take, we have ensured reliable supplies. This, combined with our flexibility, financial prowess and remarkable control over logistics makes us one of the most dependable and reliable fertilizer traders in the international arena.



We are one of the leading movers of various agro products like Rice, Soya bean, Cashewnuts, Coco beans etc, recording volumes of more than 1.5million MT. We mainly supply to consumers in Middle east, Asia, China and Africa. Our key sourcing markets includes Africa, Middle East and Myanmar where we own and operate processing plants.

Soybean or Soya bean :
It is a species of legume native to East Asia, widely grown for its edible bean, which has numerous uses. Traditional unfermented food uses of soybeans include soy milk, from which tofu and tofu skin are made. Fermented soy foods include soy sauce, fermented bean paste, nattō, and tempeh. Fat-free (defatted) soybean meal is a significant and cheap source of protein for animal feeds and many packaged meals. For example, soybean products, such as textured vegetable protein (TVP), are ingredients in many meat and dairy substitutes.Soy beans contain significant amounts of phytic acid, dietary minerals and B vitamins. Soy vegetable oil, used in food and industrial applications, is another product of processing the soybean crop. Soybean is the most important protein source for feed farm animals (that in turn yields animal protein for human consumption).
Rice, is normally grown as an annual plant, although in tropical areas it can survive as a perennial and can produce a ratoon crop for up to 30 years. Rice cultivation is well-suited to countries and regions with low labor costs and high rainfall, as it is labor-intensive to cultivate and requires ample water. However, rice can be grown practically anywhere, even on a steep hill or mountain area with the use of water-controlling terrace systems. Although its parent species are native to Asia and certain parts of Africa, centuries of trade and exportation have made it commonplace in many cultures worldwide.

We have our own processing plant in Myanmar and exports to Asian and African markets in big volumes.